Swimming pool control board with differential + lighting – PID

Since (without VAT): 246.00

Swimming pool control board with differential + lighting – PID

Shipping is only available for Continental Portugal Shipping and its respective Autonomous Regions: Azores and Madeira.

Description

Control and protection of electric pumps operating the water circulation systems of the swimming pools.


Applications

Compact system for command and protection of swimming pool equipment and technical area.

Protection against short circuits through:

  • command
  • projectors
  • water treatment
  • lighting
  • taken

Overload protection – circuit breaker – motor.

Differential switch 30mA.

Transformer 100VA 12Vac for connection of pool projectors.


Operation

1. Make the connections as indicated on the sticker, with the differential switch off (OFF).

2. Adjust breaker-engine according to the rated motor intensity.

3. Program operating times on the watch.

4. Set the pump control switch to the automatic (aut) position.


Additional Functions

  • Swimming pool projector command
  • Water treatment circuit control (Salt or PH corrector)
  • Control for heat pump
  • Command for lighting and socket in the technical area

  •  Connections

    quadro


    Note:  The images shown may not correspond completely to the described product.

    Additional information

    Weight N/A
    Dimensions (D x W x H) 33 × 29 × 15 cm
    Regulação térmica

    1,6 – 2,5 A, 2,5 – 4,0 A, 4,0 – 6,3 A, 6,0 – 10,0 A

    Tensão

    230V

    Caixa em ABS cinza

    265 x 300 x 120 mm with hinge and transparent cover in crystal polystyrene – IP65 IK07

    Interruptor horário

    with time reserve for automatic engine control

    Transformador

    100VA 12Vac for connection of pool projectors

    Comutador 3 posições

    for automatic (AUT), manual (MAN) or off (0) operation of the pool pump

    Comutador 2 posições (ON/OFF)

    for controlling the pool projector

    Acessórios / Outros

    Cable glands for connecting cables