Switching relay for alternating control of two electric pumps with manual timing – RAL 202 TEO

Since (without VAT): 30.45

Alternating Relay – 2 pumps – programmable timing

Shipping is only available for Continental Portugal Shipping and its respective Autonomous Regions: Azores and Madeira.

Description

Switching relay for alternating control of two electric pumps with manual timing (3 – 520 sec.)
Control signals by closing contact, pressure switch and internal timing


Applications

  • Alternating control of two electropumps
  • Control signals by closing contact, pressure switch and internal timing

Operation

MODE A and B – (shunt 8-6)

During each actuation of input “P1”, alternately output “S1” and “S2”. If a “P2” action appears during the “P1” operation, it will also switch on the other output.

MODE C – (pre-programmed at the factory)

During each actuation of input “P1”, alternately output “S1” and “S2”. If a “P2” action appears during the “P1” operation, it will also switch on the other output.
When the “P1” input remains active longer than “t” set on the front panel button (3 to 520 sec. Scale), it will switch on the available output (“S1” or “S2”). This remains on while “P1” remains active.


Technical Data – PDF

Download the Technical Data Sheet for this product here.

Note: The images shown may not correspond completely to the product described.

Additional information

Weight 210 g
Dimensions (D x W x H) 7.5 × 3.5 × 8 cm
Sensibilidade regulável

[3, 520] sec.

Temperatura ambiente

[-10ºC, +55ºC]

Relé de saída

AC 8A-250V / 50Hz – 1250VA DC 5A-24 V (C.R.)

Alimentação

AC (24V, 230V, 400V) / 50Hz

Consumo

2VA (approx.)

Tensão

12V DC, 24V AC, 230V AC, 400V AC

Encaixe

11-pin base